A
-
Abdolkhani, Ali
Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
-
Abdolkhani, Ali
The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
-
Abdolkhani, Ali
Comparing lignin derived from black liquors of alkaline sulfite-AQ, soda-AQ and kraft processes as a filler-extender in the poplar plywood [Volume 9, Issue 3, 2018, Pages 349-358]
-
Abdouss, majid
The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
-
Adeli, Kamran
The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
-
Adeli, Kamran
Preference of consumers in the selection of final woody products in different income quarters in households of Dorud City [Volume 9, Issue 2, 2018, Pages 175-185]
-
Adeli, Kamran
The Effect of Targeted Subsidies on the Demand Patern of Wood and its Products in Khorramabad City [Volume 9, Issue 4, 2019, Pages 525-535]
-
Aghajani, Hamed
Anatomical, Biometrical, Physical and Chemical properties of wild service tree (Sorbus torminalis L.) (Case study: Sangdeh forests of Mazandaran) [Volume 9, Issue 4, 2019, Pages 597-608]
-
Ahad nezhad, Maedeh
Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
-
Akhondzadeh Basti, Afshin
Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
-
Akhvan Sepahi, Abbas
Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
-
Aminian, Hedayatollah
Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
-
Aminian, Hedayatollah
The effect of using Alkali sulfit-Anthraquinone (AS-AQ) liquor powder as filler of urea formaldehyde resin on functional properties of plywood [Volume 9, Issue 3, 2018, Pages 337-347]
-
Amiri, Elmira
Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
-
Atun, Davod
Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
-
Azadi Bouyaghchi, mehrnaz
Influence of the Alkalified Tragacanth Gum on optical and Mechanical Strenght of the Historical Paper Documents [Volume 9, Issue 2, 2018, Pages 209-222]
B
-
Badeian, Ziadin
Preference of consumers in the selection of final woody products in different income quarters in households of Dorud City [Volume 9, Issue 2, 2018, Pages 175-185]
-
Bari, Ehsan
Assesement of the Biodegradability of Composites produced from Poly-Lactic Acid and Bamboo Flour [Volume 9, Issue 4, 2019, Pages 537-548]
-
Bayat Kashkoli, ali
Survey of Effective Criteria for Sustainable Development of Poplar Wood Farming in Iran by Pair Comparisons Method [Volume 9, Issue 2, 2018, Pages 235-249]
-
Bayrash, Majid
Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
-
Bazvand, Maryam
The Effect of Targeted Subsidies on the Demand Patern of Wood and its Products in Khorramabad City [Volume 9, Issue 4, 2019, Pages 525-535]
-
Bazyar, Behzad
Effect of coating with Shellac on acoustic properties in white mulberry wood [Volume 9, Issue 1, 2018, Pages 27-40]
-
Belouri, behzad
Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
-
Borzacchiello, susi
Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2019, Pages 497-509]
D
-
Dastoorian, Foroogh
Determination of elastic modulus of a natural fiber- thermoplastic composite [Volume 9, Issue 3, 2018, Pages 429-440]
-
Dehghan, Moein
Assesement of the Biodegradability of Composites produced from Poly-Lactic Acid and Bamboo Flour [Volume 9, Issue 4, 2019, Pages 537-548]
-
Djafari Petroudy, seyedrahman
The effect of bagasse pith xylose on yeast growth kinetic in bio-products manufacture [Volume 9, Issue 1, 2018, Pages 41-51]
-
Djafari Petroudy, Seyed Rahman
Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
E
-
Edalat, Hamidreza
Performance improvement of PVAc glue in wood finger joints by using Isocyanate as a hardener [Volume 9, Issue 4, 2019, Pages 585-596]
-
Efhamisisi, Davood
Borates and their applications to preserve wood-based composites [Volume 9, Issue 3, 2018, Pages 411-428]
-
Efhamisisi, Davood
Anatomical, Biometrical, Physical and Chemical properties of wild service tree (Sorbus torminalis L.) (Case study: Sangdeh forests of Mazandaran) [Volume 9, Issue 4, 2019, Pages 597-608]
-
Esfandyari, Masoud
Preference of consumers in the selection of final woody products in different income quarters in households of Dorud City [Volume 9, Issue 2, 2018, Pages 175-185]
F
-
Faezipour, Mohammadmahdi
Assesement of the Biodegradability of Composites produced from Poly-Lactic Acid and Bamboo Flour [Volume 9, Issue 4, 2019, Pages 537-548]
-
Fayazfar, Samira
Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
-
Fazei pour, Mehdi
Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2019, Pages 497-509]
G
-
Ghasemian, Ali
Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
-
Gholamiyan, Hadi
The Effect of layers made off clear coats on the color changes and surface quality of wood after accelerated weathering in urban furniture [Volume 9, Issue 4, 2019, Pages 561-574]
-
GHorbani, Maryam
Investigation on the physical properties and internal bonding of HDF made of oxidized fiber [Volume 9, Issue 1, 2018, Pages 127-135]
H
-
Hajighasem, Mona
Effect of coating with Shellac on acoustic properties in white mulberry wood [Volume 9, Issue 1, 2018, Pages 27-40]
-
Hajipour, Hedieh
Comparing lignin derived from black liquors of alkaline sulfite-AQ, soda-AQ and kraft processes as a filler-extender in the poplar plywood [Volume 9, Issue 3, 2018, Pages 349-358]
-
Hamzeh, Yahya
The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
-
Hamzeh, Yahya
Borates and their applications to preserve wood-based composites [Volume 9, Issue 3, 2018, Pages 411-428]
-
Harati Moghadam, Zahra
Production of Phenol-urea-formaldehyde Resin (PUF) and Investigation of its Resistive Properties in Particleboard [Volume 9, Issue 4, 2019, Pages 609-619]
-
Hedjazi, sahab
Investigation on the Influence of Alkaline Pre-Extraction of Barley Straw on Soda and Monoethanolamine Pulps Properties [Volume 9, Issue 4, 2019, Pages 485-495]
-
Hedjazi, Sahab
The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
-
Hedjazi, Sahab
The effect of using Alkali sulfit-Anthraquinone (AS-AQ) liquor powder as filler of urea formaldehyde resin on functional properties of plywood [Volume 9, Issue 3, 2018, Pages 337-347]
-
Hodges, Donald G.
The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
I
-
Izadyar, soheila
The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
J
-
Jafarnezhad, Saber
Effect of the Expanded Polystyrene Granules on the Physical and Mechanical Properties of Hybrid Lightweight Panels [Volume 9, Issue 3, 2018, Pages 383-396]
-
Jalali Torshizi, Hosein
Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
-
Jalali Torshizi, hossein
The effect of cellulose nanofibres on cationic starch efficiency in pulp and paper recycled from packaging waste paper [Volume 9, Issue 2, 2018, Pages 187-197]
-
Jamalirad, loya
Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
-
Jonoobi, mahdi
Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
-
Jonoobi, mahdi
Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2019, Pages 497-509]
-
Jourgholami, Meghdad
Evaluation of the effect of chainsaw vibration on user's hand and arm during log bucking operations [Volume 9, Issue 4, 2019, Pages 471-483]
K
-
Karimi, Abdollah
The effect of using Alkali sulfit-Anthraquinone (AS-AQ) liquor powder as filler of urea formaldehyde resin on functional properties of plywood [Volume 9, Issue 3, 2018, Pages 337-347]
-
Kazemi Najafi, Saeed
Production of Phenol-urea-formaldehyde Resin (PUF) and Investigation of its Resistive Properties in Particleboard [Volume 9, Issue 4, 2019, Pages 609-619]
-
Khajavi, Somayeh
Evaluation of the effect of chainsaw vibration on user's hand and arm during log bucking operations [Volume 9, Issue 4, 2019, Pages 471-483]
-
Khazaeian, Abolghasem
Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
-
Khazaian, Abolghasem
Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
-
Khazaian, Abolghasem
The Effect of Storage Time of Hornbeam Billet Wood on its Physical and Mechanical Properties in the Forest (Case Study of Gorgan Shastkalateh Forest) [Volume 9, Issue 4, 2019, Pages 511-524]
-
Khosravani, amir
The effect of addition of lignocellulose nanofiber produced from old corrugated container pulp on recycled paperboard properties [Volume 9, Issue 4, 2019, Pages 575-584]
-
Khosravani, Amir
The effect of dissolution time on wettability and certain properties of cellulose film produced using ionic liquid [Volume 9, Issue 2, 2018, Pages 223-234]
-
Khosravani, Amir
Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
-
Khosravi, Sheyda
The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
-
Kiaie, Majid
The effect of load and relative humidity on bending creep behaviour of hornbeam in three altitudes (Case Study, Nowshahr Meshelak Branch) [Volume 9, Issue 1, 2018, Pages 15-26]
-
Kool, Farhad
Anatomical, Biometrical, Physical and Chemical properties of wild service tree (Sorbus torminalis L.) (Case study: Sangdeh forests of Mazandaran) [Volume 9, Issue 4, 2019, Pages 597-608]
L
-
Liaghat, GholamHossein
Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
-
Luedtke, Jan
Effect of the Expanded Polystyrene Granules on the Physical and Mechanical Properties of Hybrid Lightweight Panels [Volume 9, Issue 3, 2018, Pages 383-396]
M
-
Madhoushi, Mehrab
Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
-
Mahboobian, Mohammad Mehdi
Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2019, Pages 497-509]
-
Majnounain, Baris
Evaluation of the effect of chainsaw vibration on user's hand and arm during log bucking operations [Volume 9, Issue 4, 2019, Pages 471-483]
-
Maleknia, Rahim
The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
-
Mansouri, Hamid Reza
Production of Phenol-urea-formaldehyde Resin (PUF) and Investigation of its Resistive Properties in Particleboard [Volume 9, Issue 4, 2019, Pages 609-619]
-
Mesgarhaye Kashani, Mohammad Hasan
Improving the mechanical and physical properties of particleboard produced from bamboo- industrial wood using polypropylene powder [Volume 9, Issue 2, 2018, Pages 199-208]
-
Misaghi, Ali
Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
-
Mohammadi, nasibeh
Investigation on the Influence of Alkaline Pre-Extraction of Barley Straw on Soda and Monoethanolamine Pulps Properties [Volume 9, Issue 4, 2019, Pages 485-495]
-
Mohebbi Gargari, Rahim
The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
-
Mohebbi Gargari, Rahim
Survey of Effective Criteria for Sustainable Development of Poplar Wood Farming in Iran by Pair Comparisons Method [Volume 9, Issue 2, 2018, Pages 235-249]
-
Mohebby, Behbood
The effect of dissolution time on wettability and certain properties of cellulose film produced using ionic liquid [Volume 9, Issue 2, 2018, Pages 223-234]
-
Mohseni, Reza
The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
-
Motie, Nazanin
Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2019, Pages 497-509]
-
Mousavi, Valiullah
The effect of load and relative humidity on bending creep behaviour of hornbeam in three altitudes (Case Study, Nowshahr Meshelak Branch) [Volume 9, Issue 1, 2018, Pages 15-26]
N
-
Najafi, Abdollah
The effect of load and relative humidity on bending creep behaviour of hornbeam in three altitudes (Case Study, Nowshahr Meshelak Branch) [Volume 9, Issue 1, 2018, Pages 15-26]
-
Nikkhah Dafchahi, Mostafa
Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
-
Nosrati Sheshkal, Babak
The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
R
-
Rahimi, Atefe
The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
-
Rahmaninia, Mehdi
Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
-
Rasooly Garmaroody, esmaeil
The effect of bagasse pith xylose on yeast growth kinetic in bio-products manufacture [Volume 9, Issue 1, 2018, Pages 41-51]
-
Reisi, Marzie
Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
-
Reisi, Marzie
Performance improvement of PVAc glue in wood finger joints by using Isocyanate as a hardener [Volume 9, Issue 4, 2019, Pages 585-596]
-
Resalati, Hossein
Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
-
Rezaeigolesani, Mohammadreza
Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
-
Rezayati Charani, Pejman
Improving wet tensile strength of paper glass using PAE, CNF and CMC [Volume 9, Issue 2, 2018, Pages 163-173]
-
Rezvani, Mohammad Hadi
Investigation of physical and mechanical performance of wood-based composites after laboratory accelerated aging [Volume 9, Issue 1, 2018, Pages 103-117]
-
Roohnia, mehran
Acoustically quality evaluation of date palm samples from the pith to the bark [Volume 9, Issue 1, 2018, Pages 65-74]
-
Roohnia, Mehran
Effect of coating with Shellac on acoustic properties in white mulberry wood [Volume 9, Issue 1, 2018, Pages 27-40]
S
-
Sadeghi Nik, َBehnam
The effect of dissolution time on wettability and certain properties of cellulose film produced using ionic liquid [Volume 9, Issue 2, 2018, Pages 223-234]
-
Salari, Ayoub
Investigation of the effect of modified poly vinyl acetate on the stress carrying capacity of corner joints in the wood members joined with dowel [Volume 9, Issue 3, 2018, Pages 323-336]
-
Salmani, Unes
The Effect of Targeted Subsidies on the Demand Patern of Wood and its Products in Khorramabad City [Volume 9, Issue 4, 2019, Pages 525-535]
-
Saraeyan, Ahmad Reza
Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
-
Sedghi, Mehrdad
Effect Of Paper Deacidification With Nano Calcium Hydroxide and Nano Hydroxyapatite, With Nano Cellulose And Nano Chitosan On Its Anti-Fungal Properties [Volume 9, Issue 1, 2018, Pages 53-63]
-
Sedghi, Mehrdad
EFFECT OF DRY- HEAT AND MOIST-HEAT AGING ON PROPERTIES OF PAPERS TREATED WITH NANO CALCIUM HYDROXIDE AND NANO CHITOSAN [Volume 9, Issue 2, 2018, Pages 277-288]
-
Shabanpour, Saeb
Investigation on the physical properties and internal bonding of HDF made of oxidized fiber [Volume 9, Issue 1, 2018, Pages 127-135]
-
Shafiei Amrehei, Seyyedeh Sheyda
The effect of bagasse pith xylose on yeast growth kinetic in bio-products manufacture [Volume 9, Issue 1, 2018, Pages 41-51]
-
Shakeri, Ali Reza
Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
-
Shalbafan, Ali
Effect of the Expanded Polystyrene Granules on the Physical and Mechanical Properties of Hybrid Lightweight Panels [Volume 9, Issue 3, 2018, Pages 383-396]
-
Soheilipour, azam
Influence of the Alkalified Tragacanth Gum on optical and Mechanical Strenght of the Historical Paper Documents [Volume 9, Issue 2, 2018, Pages 209-222]
T
-
Tajick Ghanbary, Mohammad Ali
Effect of environmental changes (temprature and moisture) on destructive behaviour of the white rot fungus Trametes versicolor on chestnut-leaved oak [Volume 9, Issue 1, 2018, Pages 75-85]
-
Talaei, Aisona
Investigation of physical and mechanical performance of wood-based composites after laboratory accelerated aging [Volume 9, Issue 1, 2018, Pages 103-117]
-
Tarmina, Asghar
The Effect of layers made off clear coats on the color changes and surface quality of wood after accelerated weathering in urban furniture [Volume 9, Issue 4, 2019, Pages 561-574]
V
-
Vaziri, Vahid
Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
Y
-
Yousefhashemi, Seyed Mehdi
The effect of addition of lignocellulose nanofiber produced from old corrugated container pulp on recycled paperboard properties [Volume 9, Issue 4, 2019, Pages 575-584]
-
Yousefi, Hossein
Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
-
Yousefi, Hossein
The effect of dissolution time on wettability and certain properties of cellulose film produced using ionic liquid [Volume 9, Issue 2, 2018, Pages 223-234]
-
Yousefi, Hossein
The effect of addition of lignocellulose nanofiber produced from old corrugated container pulp on recycled paperboard properties [Volume 9, Issue 4, 2019, Pages 575-584]
-
Yousefi Lonbar, Samaneh
Investigation of physical and mechanical performance of wood-based composites after laboratory accelerated aging [Volume 9, Issue 1, 2018, Pages 103-117]
Z
-
Zarea Hosseinabadi, Hamid
Investigation on fracture toughness and internal bonding of oriented strand board (OSB) made from Poplar [Volume 9, Issue 4, 2019, Pages 549-559]
Your query does not match with any item